DIY Leather Punch Rotary Punch helps you easily punch holes in leather!

Our products are specially designed for craft lovers. Abandon the outdated and complicated punching methods, use this tool to punch holes in the most efficient way and save time! A set of holes for belts and plastic products can be prepared at home. If you or your children like DIY, then this is the best tool!

MAIN FEATURES

➤Size: length: about 13 cm/5.12inch Diameter of Hole: 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm .

➤Application range: Especially suitable for punching belts, watchbands, leather watchbands, thin rubber, plastic sheets, canvas, clothing, paper, etc.

➤Quality materials: Professional for 6 pcs automatic belt punch replaceable long mute rotary punching punchers, wear resistance, good storage, allows you to use for a long time.

➤Easy to carry: Easy to disassemble after use and easy to carry, does not occupy space.

➤Easy to clean: You can clean quickly. It can be cleaned and put into a cupboard. It does not occupy a lot of space and can be kept well.

USING METHODS

Remove the screw on the top of the connecting rod, install the required punch, and then tighten the screw sleeve to fix the punch.

Fix the leather, the punch is 90 degrees perpendicular to the leather surface, and press the handle at the desired position to punch the hole (if the leather is thick, you need to repeat it several times).

SPECIFICATION

NOTE

Due to manual measurements, please allow slight measurement deviations.

Due to the different display and lighting effects, the actual color of the item may be slightly different from the color displayed on the picture.